欢迎光临江苏天凌,我厂全体员工将竭诚为您服务!
13584221858
13584221858
生物悬浮填料-立体组合式填料-悬浮球填料-MBBR流化床填料-多面空心球-管式曝气器-微孔曝气盘-宜兴市天凌环保设备有限公司

新闻动态

联系我们

生物悬浮填料-立体组合式填料-悬浮球填料-MBBR流化床填料-多面空心球-管式曝气器-微孔曝气盘-宜兴市天凌环保设备有限公司

地址:江苏省宜兴市和桥镇工业集中区纯江路47号
手机:13584221858

咨询热线13584221858

斜管填料适用范围

发布时间:2021-06-26 13:37人气:

    适用范围:
 
    适用于给水、中水、污水处理领域的沉淀分离工艺;
 
    适用于替换沉淀池、借鞋加速澄清池、平流沉淀池及高密度沉淀池中常用的各类等沉淀分离设备。
 
    适用于各类新建的沉淀池,也可配合立源先进沉淀工艺使用。
 
    斜板填料按构造型式可分为:
 
    1.小矩形斜板。
 
    2.接触絮凝斜板。
 
    3.高效复合斜。大大缩小了板间距,从而大幅度提高了沉淀空间利用率;
 
    斜板填料沉泥面积与排泥面积相等,排泥面积是普通斜管的4倍多,大幅提高了沉淀排泥负荷;
 
    由于高效沉淀设备的结构特征,以及其所采用的规格较厚的乙丙共聚板材和支撑型材,使其具有普通斜管无法比拟的刚度,耐重负荷,不易变形。传统均是通过不同高度的塑料肋条来支撑斜板片,肋条与热熔焊接,每两层斜板片之间需要多根肋条支撑,组装工艺复杂,而且传统斜板内部水流流道成矩形,只适用于上向流沉淀池。


Scope of application:
 
It is suitable for precipitation separation process in the fields of water supply, reclaimed water and sewage treatment;
 
It is suitable for various types of sedimentation separation equipment commonly used in replacement sedimentation tanks, shoe-borrowing acceleration clarification tanks, advection sedimentation tanks and high-density sedimentation tanks.
 
It is suitable for all kinds of newly-built sedimentation tanks, and can also be used with Liyuan advanced sedimentation process.
 
Inclined plate packing can be divided:
 
1. Small rectangular inclined plate.
 
2. Contact flocculation inclined plate.
 
3. High efficiency compound slope. The plate spacing is greatly reduced, thereby greatly improving the utilization rate of precipitation space;
 
The mud area of the inclined plate filler is equal to the mud discharge area, and the mud discharge area is more than 4 times that of the ordinary inclined pipe, which greatly increases the sediment discharge load;
 
Due to the structural characteristics of the high-efficiency precipitation equipment, as well as the thicker ethylene-propylene copolymer plates and supporting profiles used, it has incomparable rigidity, heavy load resistance, and is not easy to deform. Traditionally, the inclined plate is supported by plastic ribs of different heights. The ribs are welded with hot melt. Multiple ribs are required to support each two layers of inclined plate. The assembly process is complicated. Moreover, the internal flow channel of the traditional inclined plate is rectangular, which is only suitable for upper flow sedimentation tank.


免责声明:部分内容来源于网络,如有侵权,请告知删除

推荐资讯

13584221858